Looking for:
One touch ultra mini manual download |
One touch ultra mini manual download.Download manual
You may want to review the choice of sites with your healthcare professional. Page 15 When sampling blood from your forearm or palm, make sure the drop of blood is large enough approximate size before you release pressure and remove the lancing device.
Do Not smear the blood sample. Narrow Channel Gently touch the channel to the edge of the blood drop. Be careful not to push the test strip against your fingertip or the test strip may not fill completely.
Use of the wrong unit of measure may cause you to misinterpret your blood glucose level, and may lead to incorrect treatment. If you think you are suffering from severe dehydration, contact your healthcare professional immediately. When the meter memory is full, the oldest result is dropped as the newest is added.
Results are stored automatically when you test, along with the time, date and unit of measure. You can review the results stored in the meter memory, starting with the most recent.
Make sure the meter is turned off. If you insert the cable while the meter is already on, the meter will not respond to computer commands. It is not a recommended range for your blood glucose level. Replacement batteries can be found in most stores where batteries are sold. Your meter comes with the battery already installed. A battery icon appears in the far right- hand side of the meter display to indicate low battery.
This could lead to error messages or tests that read higher than the actual value. Page 26 Cleaning your meter To clean your meter, wipe the outside with a soft cloth dampened with water and mild detergent. Do Not use alcohol or another solvent to clean your meter. Do Not get any liquids, dirt, dust, blood, or control solution inside the meter through the test port or the data port.
Never spray cleaning solution on the meter or immerse it in any liquid. Messages do not appear in all cases when a problem has occurred. Page 28 You can still perform a blood glucose time use of the meter. There may be a problem with the test If you tested in a normal or warm strip. Page 30 Meter results can be affected by factors and conditions that do not affect laboratory results in the same way. The guarantee extends only to the original purchaser and is not transferable. Print page 1 Print document 32 pages.
Cancel Delete. Sign In OR. Lancet s d. Carrying Case If any of these items are missing from your kit, call LifeScan Customer Service at 1 available 24 hours a day, seven days a week.
Page 6 Turning your meter on To perform a test, insert a test strip as far as it will go. The display will turn on and the meter will briefly perform system checks. Before using your meter for the first time or if you change the meter battery, you should check and update the time and date.
Make sure you complete steps 1 to 7 below to ensure your desired settings are saved. The year last two digits only , month and day appear on the display and the year flashes.
Never re-use a test strip that had either blood or control solution applied to it. After the start-up test screen appears, the meter will display the code from your last test. Page 12 Preparing your sample site Before you test your blood glucose, wash your hands and forearm if applicable thoroughly with warm, soapy water. Rinse and dry. At times, results obtained at the forearm or palm may be different from a fingertip measurement. Talk to your healthcare professional before you begin using your forearm or palm for sampling.
Page 14 Remember: Consult with your healthcare professional before using your forearm or palm for testing. Choose a different puncture site each time you test. Repeated punctures in the same spot may cause soreness and calluses. If bruising occurs at an alternate site or you have difficulty getting a sample, consider sampling from a fingertip instead.
You may want to review the choice of sites with your healthcare professional. Page Applying Blood And Reading Results When sampling blood from your forearm or palm, make sure the drop of blood is large enough approximate size before you release pressure and remove the lancing device.
Do Not smear the blood sample. Narrow Channel Gently touch the channel to the edge of the blood drop. Be careful not to push the test strip against your fingertip or the test strip may not fill completely. If you think you are suffering from severe dehydration, contact your healthcare professional immediately.
When the meter memory is full, the oldest result is dropped as the newest is added. Results are stored automatically when you test, along with the time, date and unit of measure. You can review the results stored in the meter memory, starting with the most recent. Make sure the meter is turned off.
If you insert the cable while the meter is already on, the meter will not respond to computer commands. It is not a recommended range for your blood glucose level.
No comments:
Post a Comment